Perform SCN Coding In AMG Drive Unit Control Unit (P-SC-2020080017)
Publication date: 2020-08-01Reference number: P-SC-2020080017
PERFORM SCN CODING IN AMG DRIVE UNIT CONTROL UNIT
SERVICE CAMPAIGN BULLETIN
Reference Number(s): P-SC-2020080017, Date of Issue:
August 01, 2020
| MERCEDES-BENZ: | Model 290 |
SERVICE INFORMATION
- Ensure use of XENTRY Diagnosis version BD/DVD (03/2020 ) or higher.
- Before starting any work procedure, install all the add-ons that are updated daily in XENTRY Diagnosis .
- Make sure to follow the operation steps exactly as described in XENTRY Diagnosis.
- Use a battery charger to ensure sufficient power supply of the vehicle on-board electrical system battery (greater than 12.5 V).
- If XENTRY Diagnosis is already connected to the vehicle, start with operation step 2
.
If two or more software updates or SCN codings are performed during one workshop visit, the operation items 02-4762 and 02-5058 may only be invoiced once for each workshop order !
WORK PROCEDURE
- Connect XENTRY Diagnosis.
- Perform SCN coding in AMG DRIVE UNIT control unit.
To do this, select menu item "Quick test view - N145/1 - AMG DRIVE UNIT (AMG DRVU) - Adaptations - Control unit update - Update of SCN coding".
Then follow the user guidance in XENTRY Diagnosis.
- Disconnect XENTRY Diagnosis.
OPERATION TEXT AND FLAT RATE
OPERATION TEXT AND FLAT RATE
| Operation no. | Operation text | Flat rate | Accounting no./damage code | ||
|---|---|---|---|---|---|
| 02-9446 | Perform SCN coding in AMG DRIVE UNIT control unit (with XENTRY Diagnosis connected) | 0.1 hours | 54 904 26 | ||
| 02-4762(1) | Connect/disconnect vehicle diagnosis system (XENTRY Diagnosis) | 0.1 hours | 54 904 26 | ||
| 02-5058(1) | Connect/disconnect starter battery charger (with XENTRY Diagnosis connected) | 0.1 hours | 54 904 26 | ||
|
|||||
Mercedes-Benz
Global Service & Parts