Power Transmission, Basic Function - GF27.10-P-9901B

Model all with transmission 725.0/1 

Overview 

This document contains information on:

• General 
• Function 

General 

During power transmission, all component parts transfer the engine torque generated by the combustion engine to the drive gears.

Function 

The engine torque is transferred from the crankshaft to the torque converter, automatic transmission and transfer case (in all-wheel drive).

Power is transferred in the torque converter via the driven impeller by diverting hydraulic fluid to the turbine wheel which is connected to the drive shaft. If the torque converter lockup clutch is engaged, power flows via the mechanical connection.

Depending on the gear ratio and actuated shift elements, the torques output by the torque converter are forwarded to the output shaft via the gearwheels of the planetary gear sets with the help of the multiplate clutches and the multidisk brakes. A reduction in the output speed in low gears leads to lower vehicle speeds with simultaneously increased tractive forces and torques at the drive gears.