Vehicle Cannot Be Started Via Keyless-Go (LI42.45-P-061543)
Publication date: 2015-07-17Reference number: LI42.45-P-061543
VEHICLE CANNOT BE STARTED VIA KEYLESS-GO
TECHNICAL SERVICE BULLETIN
Reference Number(s): LI42.45-P-061543 Version 2, Date of Issue:
July 17, 2015
| MERCEDES-BENZ: | AMG GT and GTs |
| DESIGN GROUP: | 42.45 Electronic Stability Program (ESP), Stability Control (SR) |
| REASON FOR CHANGE: | Remedy revised |
COMPLAINT
The vehicle cannot be started via Keyless-Go, but the engine can still be started with the key
Various fault messages in the instrument cluster (depending on vehicle equipment)
NOTE:
Possible fault codes in various control units:
- U012100 Communication with the ESP has a malfunction.
- C11500 Communication with the powertrain control unit has a malfunction.
- U012287 Communication with the traction system control unit has a malfunction. The message is missing.
- U041525 Implausible data were received from the ESP control unit. There is a faulty signal form.
CAUSE
Software
REMEDY
Perform ESP software update
NOTE:
Check the vehicle for any unperformed field measures
CONTROL UNIT/FAULT CODE
CONTROL UNIT/FAULT CODE
| Control unit | Fault code | Fault text |
|---|---|---|
| ADS - Adaptive damping system (N51/5) (SPC197) | U012100 | Communication with ESP has a malfunction. _ |
| DKG - Electronic transmission control for double-plate clutch transmission (N15/13) (DCT) | C11500 | Communication with control unit 'Drivetrain' has a malfunction. _ |
| DKG - Electronic transmission control for double-plate clutch transmission (N15/13) (DCT) | C12987 | Communication with control unit "Regenerative braking system" has a malfunction. The message is missing. |
| ME - Motor electronics 'MED1775' for combustion engine 'M178' (N3/10) | U012287 | Communication with control unit 'Traction system' has a malfunction. The message is missing. |
| SG-SW-L - Left headlamp (E1n9) (HLI_FL212) | U012100 | Communication with ESP has a malfunction. _ |
| Driver-side SAM - Front signal acquisition and actuation module (N10/1) (SAMF_212) | U041525 | Implausible data were received from control unit 'ESP®'. There is a faulty signal waveform. |
OPERATION NUMBERS/DAMAGE CODES
OPERATION NUMBERS/DAMAGE CODES
| Op. no. | Operation text | Time | Damage code | Note |
|---|---|---|---|---|
| 43181 90 |