LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2015 >> Sprinter 2500 Van Cargo, 2.1L Eng >> Repair and Diagnosis >> External Pages >> Different car >> Section 3189 (Electronic Control Modules (Service Information)) >> Module, Anti-Lock Brake System (Abs) >> Removal And Installation >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Chrysler Voyager and 2020 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0177720Courtesy of CHRYSLER GROUP, LLC
  2. Remove the washer solvent fill tube mounting bolt (2), and remove the fill tube from the vehicle.
  3. Disconnect the antilock brake system (ABS) electrical connector (1).
  4. Remove the four antilock brake system (ABS) module to hydraulic control unit (HCU) mounting bolts (3).
  5. Carefully separate the ABS module from the HCU.
  6. Remove the ABS module from the vehicle.
scientia non olet · About LEMON Manuals