Service Campaign 2014050008 - Update Instrument Cluster Control Module Software (2014050008)

WARNING: This page is about the Sprinter 2500 Van Cargo, 2.1L Eng, which is a different variant/trim than selected.

Publication date: 2014-06-06
Reference number: 2014050008

SERVICE CAMPAIGN 2014050008 - UPDATE INSTRUMENT CLUSTER CONTROL MODULE SOFTWARE

SERVICE CAMPAIGN BULLETIN

Reference Number(s): 2014050008, Date of Issue: June 2014

SPRINTER:

Model 906, Model Year 2014

SUBJECT

Model 906, Model Year 2014

Update Instrument Cluster Control Module Software

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz Sprinter vehicles, has determined that the instrument cluster control module software does not correspond to current production configuration. An authorized Mercedes-Benz Sprinter dealer will update the instrument cluster module software at the next workshop visit.

Prior to performing this Service Campaign:

Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.

Approximately 19 vehicles are affected.

PROCEDURE

NOTE:

Use DAS/Xentry 03-04/13 with all associated patches or higher.
Follow the steps exactly as described in DAS/Xentry.
Connect battery charger (battery voltage >12.5V).
Ensure all electrical consumers are switched-off.
In the event of software/SCN update issues, contact Star Diagnosis User Help Desk. Please refer to the "pre-call" check list before contacting UHD
Refer to Star Diagnosis System (SDS) Best Practices Guide.

Update instrument cluster control module software:
Control units/IC - instrument cluster/Adaptations/Control unit programming.
Follow on-screen instructions.
NOTE: The following allowable labor operation should be used when submitting a warranty claim for this repair:

WARRANTY INFORMATION

Operation: Update software for instrument cluster control unit (02-8538)

WARRANTY INFORMATION

Damage Code	Operation Number	Labor Time (hrs.)
54 921 64 8	02-8538	0.4

NOTE: Operation Number labor times are subject to change.