Remove/Install Wheels - Ar40.10-D-1100H
MODEL 906
| Information on tires/rims | AH40.10-P-9411-01A | ||
| Notes on lug bolts | AH40.10-N-1005-01A | ||
| Remove/install | |||
| 1 | Lift/jack up vehicle | AR00.60-D-1000H | |
| 2 | Remove wheels | The wheel nuts/wheel bolts must be retightened to the specified torque after the first 50 km. |
|
MODEL 906 with CODE RH9 (Super-single tyres, 285/65 R16 C) |
*BA40.10-N-1001-01D | ||
MODEL 906 without CODE RH9 (Super-single tyres, 285/65 R16 C) |
*BA40.10-N-1002-01D | ||
| 3 | Install in the reverse order | ||
| 4 | In driver's field of view, attach an information label indicating maximum speed | If M & S tires are fitted whose permissible maximum speed is below maximum speed of vehicle. | |
| 5 | Set permanent maximum speed in instrument cluster | MODEL 906 with CODE CL4 (Multifunction steering wheel with trip computer) |
|
| 6 | Connect diagnostic system and teach in tire pressure sensors | MODEL 906 with CODE RY2 (Tire pressure monitor for front and rear axle) When changing wheels to a different position, changing from summer to winter tires and vice-versa and when replacing one or more tire pressure sensors. |
|
| AD00.00-D-2000-04SD | |||
| Check | |||
| 7 | Check tire pressure and correct if necessary |
WHEELS
| Number | Designation | MODEL 906 73T MODEL 906 with CODE RH9 | ||
|---|---|---|---|---|
| BA40.10-N-1001-01D | Wheel bolt | Steel rim | Nm | 240 |
| Aluminum rim | Nm | 180 | ||
WHEELS
| Number | Designation | MODEL 906 except CODE RH9 | |
|---|---|---|---|
| BA40.10-N-1002-01D | Wheel nut | Nm | 180 |