Fuel Controls DTCS (Tank)
FUEL CONTROLS DTCS (TANK)
| MB DTC | Control Module | Description |
|---|---|---|
| EB210D | Tank | The voltage supply is too low. |
| EB210E | Tank | The voltage supply is too high |
| EP0A7C | Tank | The control unit is overheated. |
| EP1611 | Tank | The fuel pump has been switched off. |
| P0030 | Tank | This fault can be ignored and erased. |
| P0087 | Tank | This fault can be ignored and erased. |
| P0627 | Tank | The fuel pump is malfunctioning or has an open circuit. |
| P0628 | Tank | This fault can be ignored and erased. |
| P0629 | Tank | This fault can be ignored and erased. |
| P062A | Tank | This fault can be ignored and erased. |
| P1240 | Tank | The CAN bus is malfunctioning. |
| P162A | Tank | The 'fuel pump' control unit is malfunctioning. |
| P2539 | Tank | This fault can be ignored and erased. |
| P2540 | Tank | This fault can be ignored and erased. |
| P2541 | Tank | This fault can be ignored and erased. |
| P2542 | Tank | This fault can be ignored and erased. |
| U0100 | Tank | This fault can be ignored and erased. |
| U0310 | Tank | This fault can be ignored and erased. |
| U0401 | Tank | This fault can be ignored and erased. |
| U0427 | Tank | This fault can be ignored and erased. |
| U1600 | Tank | This fault can be ignored and erased. |
| U1601 | Tank | The control unit software is missing or faulty. |
| U160E | Tank | The control unit has an internal hardware fault. |