Turbocharging, function - GF09.00-P-2000P
ENGINE 642.9 in MODEL 164.1 /8, 203.0 /2, 204.0 /2, 209.3 /4, 211.0 /2 /6, 219.3, 221.0 /1, 251.0 /1
ENGINE 642.9 in MODEL 463.3
ENGINE 642.9 in MODEL 461.3
Charging serves to make an appropriate boost pressure available to the engine in every operating phase and thus to increase engine performance and engine torque. For exhaust gas turbocharging, the flow energy of the exhaust gases is used to drive the turbocharger. The turbocharger draws in fresh air at the compressor intake, compresses it and directs it through the compressor outlet, the charge air pipe, the charge air cooler and the air intake manifold to the engine's individual cylinders.
Turbocharging is regulated by the boost pressure control.
| Component description for the charge air temperature sensor | Model 164.8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 463 B17/8 |
GF07.04-P-6050P | |
| Model 461 B17/8 |
GF07.04-P-6050GX | ||
| Component description for the charge air temperature sensor | Model 204.0 B17/8 |
GF07.04-P-6052CO | |
| Component description for the temperature sensor upstream of the turbocharger | Engine 642.920 in model 211.022 with code (494) USA version Engine 642 in model 221 |
GF07.16-P-3021SX | |
| Model 204.0 B19/11 |
GF07.16-P-3021CO | ||
| Component description for the boost pressure sensor | Model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 463 B5/1 |
GF07.04-P-6051P | |
| Model 461 B5/1 |
GF07.04-P-6051GX | ||
| Component description for the boost pressure sensor | Model 204.0 B5/1 |
GF07.04-P-6053CO | |
| Component description for the CDI control unit | N3/9 Model 203, 209 |
GF07.16-P-6000P | |
| N3/9 Model 211, 219 |
GF07.16-P-6000T | ||
| N3/9 Model 164, 463 |
GF07.16-P-6000GZ | ||
| N3/9 Model 221 |
GF07.16-P-6000SX | ||
| N3/9 Model 251 |
GF07.16-P-6000RT | ||
| N3/9 Model 204.0 |
GF07.16-P-6000CO | ||
| N3/9 Model 461 |
GF07.16-P-6000GX | ||
| Component description for the turbocharger | Model 203.0/2, 209.3/4, 221.0/1 Model 211.0/2/6, 219.3 to 31.5.06 Model 164.1/8, 251.0/1 except code (494) USA version Model 461, 463 |
GF09.40-P-4010P | |
| Model 211.0/2/6, 219.3 from 1.6.06 Model 164.1/8, 251.0/1 with code (494) USA version |
GF09.40-P-4010TU | ||
| Model 204.0 | GF09.40-P-4010CO | ||
| Component description for the boost pressure positioner | Model 203.0/2, 204.0, 209.3/4, 221.0/1 Model 211.0/2/6, 219.3 to 31.5.06 Model 164.1/8, 251.0/1 except code (494) USA version Model 461, 463 |
GF09.40-P-4020P | |
| Model 211.0/2/6, 219.3 from 1.6.06 Model 164.1/8, 251.0/1 with code (494) USA version |
GF09.40-P-4020TU | ||
| Component description for the charge air cooler | Model 203, 209, 211, 219 | GF09.41-P-5000P | |
| Model 164, 251, 463 | GF09.41-P-5000GZ | ||
| Model 221 | GF09.41-P-5000SX | ||
| Model 204.0 | GF09.41-P-5000CW | ||
| Model 461 | GF09.41-P-5000GX |