Flywheel/FLEXPLATE Replacement Procedure (03.30/11)

Publication date: 2009-01-28
Reference number: 03.30/11

FLYWHEEL/FLEXPLATE REPLACEMENT PROCEDURE

TECHNICAL SERVICE BULLETIN

Reference Number(s): S-B-03.30/11, Date of Issue: January 28, 2009

MERCEDES-BENZ:	All Models
GROUP:	03 Crank assembly

SUBJECT

MY- All, Models All with Engine 272 with Transmission 722.6/9, Engine 273 with Transmission 722.9, Engine 272 with Transmission 722.6

Flywheel/Flexplate Replacement Procedure

The following must be observed when replacing the flywheel/flexplate in vehicles with engine 272 and transmission 722, as well as vehicles with engine 273 and transmission 722.

FLYWHEEL/FLEXPLATE REPLACEMENT PROCEDURE

Spacer washer A 273 032 00 52 must be installed between the new flywheel/flexplate A 273 030 03 12 and the crankshaft.
Spacer plate A 112 032 02 52 must be installed between the bolt heads and the flywheel/flexplate.

NOTE: The screw-in depth of bolts A 007 990 88 04 in the flywheel/flexplate plate may be insufficient due to unfavorable tolerances; and therefore, the torque converter must be fastened to the new flywheel/flexplate using bolts N 007 984 010 036 and washers A 327 990 06 40.

This procedure is to be followed until further notice.

PARTS INFORMATION

Qty.	Part Name	Part Number
1	Space washer	A 273 032 00 52
1	Ring gear	A 273 030 03 12
1	Spacer plate	A 112 032 02 52
6	Bolts	N 007 984 010 036
6	Washers	A 327 990 06 40