LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> CLK500 2D Coupe >> Repair and Diagnosis >> General Information >> Reset Procedures >> ATEQ TPMS Reset Procedure >> ATEQ TPMS Reset Procedure

ATEQ TPMS Reset Procedure

NOTE: Whenever tire pressure has been adjusted, or when wheels or tires have been replaced, the TPMS must be reactivated before it can work.
  1. Ensure inflation pressure of all 4 tires is set to specification.
  2. Switch ignition ON. The standard display menu will appear in multifunction display on instrument cluster (shows information such as outside temperature and trip odometer).
  3. Press the up or down button (located on left side of multifunction steering wheel) repeatedly until cluster display reads "RUN FLAT INDICATOR ACTIVE. REACTIVATION POSS: +".
  4. Press "+" button (located on right side of multifunction steering wheel). The multifunction display will now read "TIRE PRES. NOW OK? NO YES".
    NOTE: To cancel activation process, press "-" button or wait until message has disappeared from multifunction display.
  5. To confirm activation, press "+" button. The multifunction display will now read "RUN FLAT INDICATOR REACTIVATED". After a certain "learning phase", the TPMS will check the set pressure values for all 4 tires.
scientia non olet · About LEMON Manuals