Shift pattern display, function - GF27.19-P-5129-03PZ

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.

Transmission 722.6 in model 203 as of 01.06.03 up to 23.04.04, 215, 220 (except 215.374/379, 220.074/174/179) as of 01.09.02

Fig 1: Identifying Shift Pattern Display And Transmission Mode Switch (Transmission 722.6 Model 203 As Of 01.06.03 Up To 23.04.04)

The program selection performed with the driving program switch (S16/5) is sent from the ETC control unit (N15/3) to the instrument cluster A1 and the selector lever position is sent from the electronic selector lever module control unit (N15/5) to the instrument cluster ().

The program selection performed at the transmission mode switch (S16/5) only remains stored after a driving time of approx. 1 minute and is then displayed again once the engine is started again. The driving time of approx. 1 minute is necessary because of the system. The selector diagram system of symbols (87) is illuminated when the driving lamps are switched on