Command valve, function - GF27.60-P-5138-04G
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
Transmission 722.6
1-2/4-5 command valve shown Stationary phase (B1 engaged, K1 disengaged)
Fig 1: Command Valve Function Diagram, Stationary Phase (B1 Engaged, K1 Disengaged) - Transmission 722.6
1-2/4-5 command valve shown
Shift phase (B1 disengaging, K1 engaging)
Fig 2: Command Valve Function Diagram, Shift Phase (B1 Disengaging, K1 Engaging) - Transmission 722.6
Operation
When the end face is unpressurized (stationary phase), the working pressure is directed to the actuated shift element.
If the end face of the command valve (31) is subjected to shift valve pressure (p-SV) (shift phase), then the shift pressure (p-S) is switched to the engaging element and the overlap pressure (p-U) is switched to the disengaging element.