Center shifter console, function - GF27.60-P-5100-04P

WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.

TRANSMISSION 722.6 in MODEL 203, 209, 211, 219

Illustrated on model 203.061

Fig 1: Identifying Center Shifter Console - Illustrated On Model 203.061

Function

The selector lever is moved and positioned in the shift gate, which is not visible to the driver. All the selector lever positions are detected by the electronic selector lever module control unit (N15/5), coded and transmitted via the Controller Area Network-Bus Class C (engine compartment) (CAN-C) to the ETC [EGS] control unit (N15/3).

Selector lever positions "P", "R", "N" and "D" are passed on mechanically by means of a shift rod to the range selector lever on the transmission side in parallel to sending via CAN.

The shift ranges "1", "2", "3" and "4", up to those which the electronic transmission control permits the upshifting of the automatic transmission, can be shifted via a sideways movement of the selector lever into selector lever position "D" (touch shift).