TPMS Reminder Reset - Procedure 20

Requirements: 

• The recommended tire pressure is correctly set for the respective operating status on all of the wheels.

  Restart the tire pressure monitoring system in the following situations:

• The tire pressure has changed.
• The wheels or tires have been changed or newly installed.

On-board computer:

Service < Tires

• Swipe downwards on Touch Control on the left-hand side of the steering wheel.

  The "Use Current Pressures as New Reference Values" message is shown in the Instrument Display.

• To restart, press Touch Control on the left- hand side of the steering wheel

  The "Tire Press. Monitor Restarted" message is shown in the Instrument Display.

  Current warning messages are deleted and the yellowhwarning lamp goes out.

  After you have been driving for a few minutes, the system checks whether the current tire pressures are within the specified range. The current tire pressures are then accepted as reference values and monitored.

Be sure to also pay attention to the following related topic: