Section 125 (Rear Axle -- Component Modifications -- 203 Chassis)
WARNING: This page does not describe the selected car, but rather 25 other vehicles, including the 2007 Mercedes-Benz C350, 2007 Mercedes-Benz C280, 2007 Mercedes-Benz C230, 2006 Mercedes-Benz C55, and 2006 Mercedes-Benz C350. However, it is still accessible from the selected car via links, so may be relevant.
- Component Modifications
- Gear sets ground - BT35.31-P-0011-01B
- Radial sealing ring and joint flange on drive pinion modified - BT35.31-P-0012-01A
- Radial sealing ring and joint flange on drive pinion modified - BT35.31-P-0012-01B
- Radial sealing ring and joint flange on drive pinion modified - BT35.31-P-0012-01C
- Radial sealing ring on side of rear axle housing and connecting flange modified - BT35.31-P-0013-01A
- Radial sealing ring on side of rear axle housing and connecting flange modified - BT35.31-P-0013-01B
- Rear axle center assembly end cover with non-machined sealing surface - BT35.31-P-0014-01A
- Oil filler screw and oil drain screw changed on rear axle center assembly - BT35.31-P-0015-01A
- Integrated thrust washer on tapered roller bearing inner race - BT35.31-P-9402-01A
- Routing of ASD ring cylinder and hydraulic pipe modified - BT35.41-P-0002-01A