Roll bar system malfunction indicator lamp control, function - GF91.59-P-3000KA
Models 208.435 /444 /445 /447 /448 /465 /470
The roll bar system malfunction indicator lamp control is integrated into the RB switch (manual operation, S83) and is activated by the roll bar (RB)/soft top operation control module (N52) .
Flashing of malfunction indicator lamp
- at intermediate positions of roll bar and "Motor ON".
Continuous malfunction indicator lamp operation
- after switching on the ignition until the vehicle's engine starts (as function check).
- at malfunctions in the N52 and faults, which impair the operational capability of the roll bar.
At continuous malfunction indicator lamp illumination, the roll bar must
be raised
for safety reasons.
| Roll bar/soft top operation control module, location/task/design/function | GF77.39-P-3100KA | ||
| Roll bar actuation (manual operation) switch, location/task/design/function | GF91.59-P-2100KA | ||
| Roll bar raised limit switch, location/task/ design/function | GF91.59-P-2101KA | ||
| Roll bar lowered limit switch, location/task/ design/function | GF91.59-P-2102KA |