LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2003 >> CLK430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Engine Controls - System & Component Testing) >> Electronic Accelerator Tests >> Reverse Light Switch (S16/2)

Reverse Light Switch (S16/2)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 Mercedes-Benz ML320, 2002 Mercedes-Benz E320, 2002 Mercedes-Benz CLK320, 2001 Mercedes-Benz ML320, and 2001 Mercedes-Benz E320. However, it is still accessible from the selected car via links, so may be relevant.

Manual Transmission Only -  Connect DVOM between ME-SFI control module connector "A" terminal No. 3 and ME-SFI control module connector "D" terminal No. 14 (socket box terminals No. 3 and 46). Turn ignition on. With reverse gear not engaged, voltage should be less than one volt. With reverse gear engaged, voltage should be 11-14 volts. If voltage is within specification, test is complete. If voltage is not within specification, possible causes are wiring harness failure or clutch reverse light switch (S16/2) failure. Repair as necessary.

scientia non olet · About LEMON Manuals