DTC Description

Fault Memory & Actuation Of MIL - After 2 consecutive driving cycles with fault.
Frequency Of Testing - Continuous.
Checked Signal Or Status - Engine speed.
Upper Limit Value - Specified value plus 300 RPM.
Lower Limit Value - Specified value minus 250 RPM.
Duration Of Test - Less than 30 seconds.
Test Conditions - Engine temperature more than 68°F (20°C), A/C off and vehicle stationary.

NOTE: If activation of actuator motor in throttle valve actuator is changed by the ME-SFI control module, the new value must be reached within approximately 25 seconds.