Switching off interior motion sensor (IMS), function - GF80.50-P-3025S

MODEL 215, 220 with CODE (491) US version 

MODEL 215, 220 with CODE (882b) Interior motion sensor (only with ATA) 

Function prerequisites 

The interior motion sensor (IMS) can only be switched off when

• the anti-theft alarm (ATA) is activated previously  and
• circuit 15 is OFF.

Function 

To switch off the IMS actuate the TS, IMS and ATA function indicator switch (N72/1s7). After releasing the switch successful switch-off is indicated by the LED in the switch flashing  for two seconds. The next time the ATA is activated  the IMS remains off.

• The IMS can only be switched off for one  ATA activation period. Before the ATA is activated again switch-off must be repeated if desired.
• Further actuation of the switch for switching off  the anti-towing sensor (TS)  is only effective following the confirmation signal by the LED.