Lock/unlock vehicle with interior switch, function - GF80.20-P-3009GH

MODEL 163 

The vehicle can be locked or unlocked centrally with the central locking switch (S21s10). The status of the anti-theft alarm (ATA) changes.

Function requirements: 

• A valid key is inserted in the ignition switch or
• the vehicle was previously unlocked with the transmitter key

up to 31.08.2002: 

Actuation of the interior switch is recognized by the all-activity module (AAM) (N10). If the vehicle is locked or unlocked depends on the momentary status of the central locking (central locking microswitch) and the doors (rotary tumbler microswitch).

As of 01.09.2002 

Actuation of the interior switch is recognized by the all activity module (AAM) (N10). If the vehicle is locked or unlocked depends on the momentary status of the central locking central locking microswitch and the doors (rotary tumbler microswitch).

Unlock vehicle 

• If all doors are closed or locked, all vehicle doors are unlocked electrically
• If the driver's door and/or passenger door is open and the remaining doors are locked, all vehicles door are unlocked electrically except the driver's door and the fuel filler flap.
• If the rear door is open and the remaining doors are locked, all vehicle doors are unlocked electrically except the rear door

Lock vehicle: 

Except in the above mentioned cases, all vehicle doors and the fuel filler flap are locked electrically when the central locking switch (S21s10) is actuated.

When the vehicle is locked or unlocked with the interior switch, there is no feedback

	Locking with remote control key, function		GF80.20-P-3005GH
	Unlocking with remote control key, function		GF80.20-P-3006GH
	Locking/unlocking central locking, function		GF80.20-P-4017GH
	All activity module, location/task/design/function	up to 11.99.	GF54.21-P-4100GH
		as of 12.99.	GF54.21-P-4100GK