LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2001 >> E430 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Power Mirror/Steering Column Adjustment Systems - E-Class) >> System Tests >> Test 13: Driver's Side Horizontal Adjustment Motor Test

Test 13: Driver's Side Horizontal Adjustment Motor Test

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1999 Mercedes-Benz E430, 1999 Mercedes-Benz E320, 1999 Mercedes-Benz E300, 1998 Mercedes-Benz E430, and 1998 Mercedes-Benz E320. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to LOCK position. Using Harness Adapter (210 589 01 63 00), connect Breakout Box (129 589 00 21 00) to combination control module. Disconnect driver's side mirror harness connector No. 1. Turn ignition switch to RUN position.
  2. Using a jumper wire, connect pin No. 5 at driver's side mirror connector No. 1 to terminals No. 1 at driver's side mirror harness connector No. 1. Using Fused Jumper Wire (124589 37 63 00), connect terminals No. 1 and 3 at breakout box. Using another jumper wire, briefly connect pin No. 4 at driver's side mirror connector No. 1 to terminals No. 2 at driver's side mirror harness connector No. 1. If driver's side horizontal adjustment motor runs, driver's side horizontal adjustment motor is okay at this time. If driver's side horizontal adjustment motor does not run, check wiring. See WIRING DIAGRAMS . If wiring is okay, replace driver's side mirror assembly.
scientia non olet · About LEMON Manuals