LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2000 >> SL600 >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Anti-Lock/Traction Control) >> Removal & Installation >> Front Wheel Speed Sensor >> Removal

Front Wheel Speed Sensor: Removal

WARNING: This page is about a different car, the 1996 Mercedes-Benz E320, 1996 Mercedes-Benz E300, 1995 Mercedes-Benz E420, 1995 Mercedes-Benz E320, and 1995 Mercedes-Benz E300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front wheel. With ignition off, separate coaxial cable in engine compartment. Remove from bracket. Pull cable downward from grommet in wheelhousing.
  2. Remove windshield washer reservoir before removing right speed sensor (if necessary). Loosen partition in engine compartment near coaxial cable. Lift partition slightly and pull out cable.
  3. Speed sensors have different protective tubes at left and right, identified in holder by "L" or "R". Before installing, ensure NO metal is on sensor magnetic edges. Coat sensor and steering knuckle bore with Molykote Long-Term 2 lubricant.
  4. Remove cover plate protective tube. Remove and discard speed sensor attaching bolt. Pull speed sensor from steering knuckle bore.
scientia non olet · About LEMON Manuals