LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2000 >> SL600 >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - Self-Diagnostics With Codes) >> Self-Diagnostic System >> Retrieving Codes >> Using Hand Held Tester (HHT)

Using Hand Held Tester (HHT)

WARNING: This page is about a different car, the 1998 Mercedes-Benz SL500, 1997 Mercedes-Benz SL500, 1997 Mercedes-Benz E420, and 1996 Mercedes-Benz SL500. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition off. Connect HHT to 38-pin diagnostic connector located in right rear of engine compartment. Turn ignition on. Follow manufacturer's instructions for reading fault codes. If no fault codes are present, but vehicle is experiencing a problem, go to SYMPTOM DIAGNOSTICS .

scientia non olet · About LEMON Manuals