Seat adjustment collision avoidance, function - GF91.29-P-2010A
Models 215, 220
Function prerequisites:
- Normalizing performed
To avoid collisions of the seat with the seat adjustment switch, the center console, the B-pillar or the roof, the left front seat adjustment control module with memory (N32/1) and right front seat adjustment control module with memory (N32/2) have map controls. In this connection when the motors are actuated the maximum range of adjustment is restricted by means of performance maps stored in the control module and therefore avoid the seat colliding with an obstacle.
The following possibilities of a collision can arise during seat adjustment depending on the current seat position:
| Collision possibilities | Actuation 1 | Actuation 2 |
|---|---|---|
| Cushion frame/ Seat adjustment switch | Seat cushion angle down | Seat height adjustment down |
| Center console/ Seat cushion | Seat lengthwise adjustment to the front | Seat cushion adjustment to the front |
| B-pillar Backrest | Seat forward/back adjustment to rear | Seat backrest adjustment to the rear |
| Roof Head restraint | (Backrest adjustment vertical) | Head restraint upwards |
| Seat calibration, function | GF91.29-P-3005S |