Blocking detection, function - GF91.29-P-3007S
Models 215, 220
An obstruction is detected
The control modules constantly receive signals from the Hall sensors of the actuated motors. These signals are evaluated for position measurement. If the time intervals in which they enter the control module are too large or are missing completely, blocking is recognized and after t = 2 s actuation is interrupted. Only after the switch is released is a renewed actuation possible in this direction after t = 2 seconds. In comparison an actuation in the opposite direction is possible immediately.
| Seat adjusting motors position measurement function | 220.063 with code 275a only | GF91.29-P-4000S |