Manual drive mode selection, function - GF27.60-P-3011GH
TRANSMISSION 722.6 in MODEL 163 without touch shift
Operation
With the selector lever on the floor shift it is possible to adapt the automatic gearshift sequence to suit specific operating conditions.
Although the selector lever position can be changed in the forward gears while driving, the electronic transmission control (ETC) prevents over-revving of the engine.
| Floor shift, location/task/design/function | GF27.60-P-5100GH | ||
| Reverse lamp switch, location/task/ function | GF27.19-P-5132G | ||
| Shift detent mechanism, location/task/design/ function | GF27.60-P-5101G | ||
| D-4 shift isolating mechanism, location/ task/ design/function | GF27.60-P-5102G | ||
| Location/task/design/function of R/P lock | GF27.60-P-5103G | ||
| Position sensor, location/task/function | GF27.19-P-5129GH | ||
| Transmission range recognition switch, location/task/design/function | GF27.19-P-5101GH | ||
| ETC control module, location/task | GF27.19-P-4012G |