LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2000 >> ML430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Automatic A/C-Heater Systems) >> Removal & Installation >> Receiver-Drier >> Removal

Removal & Installation: Receiver-Drier: Removal

WARNING: This page is about a different car, the 2000 Mercedes-Benz C43, 2000 Mercedes-Benz C280, 1999 Mercedes-Benz C43, and 1999 Mercedes-Benz C280. However, it is still accessible from the selected car via links, so may be relevant.
  1. Discharge A/C system, using approved refrigerant recovery/recycling equipment. Locate receiver-drier on left front corner of engine compartment. Disconnect A/C pressure sensor. Remove A/C pressure sensor.
  2. Disconnect refrigerant lines from receiver-drier. Remove screws and receiver-drier. Loosen and remove piston ring clamp with retaining clips and pull off.
scientia non olet · About LEMON Manuals