LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2000 >> CLK430 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Automatic A/C-Heater Systems) >> Removal & Installation >> A/C Push Button Control Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2000 Mercedes-Benz C43, 2000 Mercedes-Benz C280, 1999 Mercedes-Benz C43, and 1999 Mercedes-Benz C280. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove radio. Remove 4 screws from radio opening and trim cover. Detach switch block from cover. Remove screws and pull out A/C push button control module (A/C-heater control panel). Disconnect wiring harness from A/C-heater control panel.
  2. To install, reverse removal procedure. Ensure A/C-heater control panel wiring harness is securely attached. Erase fault memory from A/C-heater control panel. Reset version code. See VERSION CODING  under PROGRAMMING.
scientia non olet · About LEMON Manuals