Automatic Transmission -- 202 Chassis
- Basic Knowledge
- Trouble Diagnosis
- Whistling noise (oil flow noise) when transmission is shifted to drive position "R" - AF27.00-P-1000BG
- Howling or singing noises from area of torque converter/primary pump - AF27.00-P-1100BG
- Transmission in limp-home mode or was in limp-home mode, stored DTC: 037 or 133 - AF27.00-P-3401A
- Delayed engagement in "D" and "R" drive modes > 5 seconds - AF27.00-P-3402A
- Transmission does not shift up occasionally, DTC stored: 114 - AF27.00-P-3403A
- Transmission in limp home mode, DTC 002 to 007 stored - AF27.00-P-3404A
- Electronic transmission control (ETS): DTC 116 - AF27.19-P-8001A
- DTCs C1035 and/or C1170 stored in electronic stability program control unit (ESP) - AF27.19-P-8002A
- Humming/droning in 5th gear at approx. 2500 rpm - AF27.20-P-1300AG
- Delayed power transmission in drive mode "D" and "R" (switch on time greater than 2-3 seconds) - AF27.35-P-3100BA
- Long or soft upshift 2-3 - AF27.35-P-6100A
- Central locking temporarily without function - AF27.60-P-6040AU
- Self-Diagnostic System
- Testing & Repair
- Checking oil level in automatic transmission and correcting, if necessary - AR27.00-P-0100A
- Disconnecting and connecting plug connector - AR27.10-P-0500-01A
- Remove/install oil filler pipe - AR27.10-P-0500-04A
- Removal and installation of transmission with torque converter - AR27.10-P-0500A
- Remove/install transmission with torque converter - AR27.10-P-0500B
- Remove/install transmission with torque converter - AR27.10-P-0500BD
- Remove/install transmission with torque converter - AR27.10-P-0500GH
- Remove/install transmission with torque converter - AR27.10-P-0500I
- Remove/install transmission with torque converter - AR27.10-P-0500P
- Remove/install transmission with torque converter - AR27.10-P-0500R
- Remove/install transmission with torque converter - AR27.10-P-0500T
- Insert selector valve into driver of detent plate - AR27.19-P-0200-01A
- Remove/install electrohydraulic controller unit (transmission installed) - AR27.19-P-0200A
- Disassemble and assemble electrohydraulic control unit - AR27.19-P-0220A
- Remove/install torque converter - AR27.20-P-0500-01B
- Dismantle and assemble shift plate - AR27.35-P-0350A
- Flush out oil cooler lines and oil cooler - AR27.55-P-0001A
- Flushing out oil cooler lines and oil cooler - AR27.55-P-0001GA
- Removing and installing ignition lock control cable - AR27.60-P-0122E
- Removing and installing wire cable/transmission for parking lock interlock on transmission - AR27.60-P-0500-05A
- Removing and installing wire cable / transmission for parking shift lock on transmission - AR27.60-P-0500-05B
- Remove/install floor selector - AR27.60-P-0900B
- Removing and installing electronic selector lever module (ESM) - AR27.60-P-0901B
- Removing and installing selector lever handle - AR27.60-P-0920-01A
- Disassembling and assembling floor shift - AR27.60-P-0920B
- Adjusting wire cables for parking lock interlock - AR27.60-P-0965A
- Adjusting wire cables for parking lock interlock - AR27.60-P-0965B
- Adjusting shift rod - AR27.60-P-0980B
- Removing and installing wire cable for parking lock interlock - AR27.60-P-1000B
- Component Modifications