LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1999 >> CLK430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Engine Controls - System & Component Testing) >> Fuel Injector Tests >> Injector Leak Test

Injector Leak Test

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2002 Mercedes-Benz SL500, 2002 Mercedes-Benz S500, 2002 Mercedes-Benz S430, 2002 Mercedes-Benz E55, and 2002 Mercedes-Benz E430. However, it is still accessible from the selected car via links, so may be relevant.

Remove fuel rail with fuel injectors. Connect jumper wire between ME-SFI control module connector "A" terminal No. 3 and ME-SFI control module connector "C" terminal No. 29 (socket box terminals No. 3 and 21). Turn ignition on and observe fuel injectors. Fuel injectors must not drip. If fuel injector(s) do not drip, test is complete. If fuel injector(s) drip, possible cause is faulty fuel injector(s). Repair or replace as necessary.

scientia non olet · About LEMON Manuals