Operating the deployment device - AR91.60-P-0611-04A

Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. When working on these units, disconnect the power supply. 

Models 124, 129 up to 30.6.93, 140, 202 up to 30.6.93 

Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. When working on these units, disconnect power supply and unplug the SRS test connector (X11/13). 

Models 163, 168, 170, 202, 203, 208, 209, 210, 215, 220, 230, 240, 414, 461, 463 

All models 

For testing arrangement, turn rotary switch of deployment device to position	Cable set plug, no. up to 6/93	Cable set plug, no. as of 7/93	Test scope	Press: Keys	Specified value: LED		Possible causes for deviation from specified value
1			Internal battery test	Press Deployment device not connected		ON	Replace any battery set for ignition device: 2 Baby cells
					Green malfunction indicator lamp	ON	(2 x 1.5 V)
1	3+4	10+11	Actuation of driver side squib	Press both pushbuttons	Before actuation		Trigger circuit is defective
						ON
2	1+2 3+4	1+2 3+4	Deployment of emergency tensioning retractor squib, left seat Deployment of emergency tensioning retractor squib, right seat	Press both pushbuttons	Deployment makes a bang		Trigger circuit is defective
3	5+6	13+14	Ignition Front passenger squib	Press both pushbuttons	2. After deployment		Trigger circuit is defective
						ON
					Green malfunction indicator lamp	ON