Deployment of airbag units when no deployment device is present - AR91.60-P-0611-05A

MODELS 163, 170, 202 as of 1.7.93, 208, 210,414,463 

Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. When working on these units, disconnect the power supply. 

MODEL 202 up to 30.6.93 

Store airbag unit with expulsion area on top, do not subject to temperatures above 100 °C. When working on these units, disconnect power supply and unplug the SRS test connector (X11/13). 

Models 163, 168, 170, 202, 203, 208, 210, 215,220,414,463 

All models 

Application of shop-made ignition cables 

1. Make up ignition cable of min. 10 m length with pressure switch.
2. Plug the 2-pin plug connector into the corresponding airbag unit.
3. Connect ignition cables to the battery.
4. Press both pressure switches simultaneously.
5. For airbag units with 2 squibs, both must be deployed. To do this, repeat steps  2 through  4 after plugging the ignition cable into the second squib.

   Keep a distance of 10 meters for safety.