LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1998 >> E430 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seats, Restraint Systems - Basic Knowledge - 210 Chassis >> Basic Knowledge >> Function of storing seat position - GF91.29-P-2004A

Function of storing seat position - GF91.29-P-2004A

MODEL 210.081 /281, 210 (except 210.081 /281) as of 1.3.97 with CODE (275a) Memory package (driver's seat, steering column, rearview mirrors) 

MODEL 208 with CODE (275b) Memory package (driver's seat, rearview mirrors) 

Definition 

The positions of the front seats and steering column (model 210 only) can be stored in three memory locations. The seat position is stored in the driver-side ESA control module (with memory) (N32/1)  or in the passenger-side ESA control module (with memory) (N32/2)  . When the seat position for the driver's seat is stored the positions of the outside rearview mirrors  are also stored in the door control modules  .

Storing driver's seat position 

To store the momentary position of the driver's seat press the memory switch (S91/2s9)  and then the desired memory button 1 (S91/2s6), 2 (S91/2s7)  or 3 (S91/2s8)  within three seconds. If none of the other switches in the same switch cluster is pressed simultaneously, the front driver-side door control module (N69/1)  transmits a CAN message to the driver-side ESA control module (N32/1)  . The control module checks whether the values supplied by the position measurement feature  are valid. If so these values are stored in the driver-side ESA control module (N32/1)  .

Storing passenger seat position 

To store the passenger seat position press the memory switch (S92/2s9)  and then the desired memory button 1 (S92/2s6), 2 (S92/2s7)  or 3 (S92/2s8)  within three seconds. If one of the other switches in the same switch cluster is not actuated simultaneously, the front passenger-side door control module (N69/2)  transmits a CAN message to the passenger-side ESA control module (with memory) (N32/2)  . The control module checks whether the values supplied by the position measurement  are valid. If so these values are stored in the passenger-side ESA control module (with memory) (N32/2)  .

REFER TO BASIC KNOWLEDGE Calling up stored seat position   GF91.29-P-2003A 
REFER TO BASIC KNOWLEDGE Actuation of motor group for adjusting front seat   GF91.29-P-3003A 
REFER TO BASIC KNOWLEDGE Storing outside rearview mirror position   GF88.79-P-2004A
REFER TO BASIC KNOWLEDGE Switch cluster for adjusting front seat   GF91.29-P-2100C