Wheels, Chassis Alignment Check - 140 Chassis

• General Information
  • Information on measuring tire tread depth - AH40.10-P-0006-01T
  • General notes on Continental Tire System (CTS) - AH40.10-P-1060-01A
  • Information on tires / rims - AH40.10-P-9411-01A
• Basic Knowledge
  • Continental Tyre System (CTS), function - GF40.10-P-0001A
    • Notes
    • Continental Tyre System (CTS), tire designation - GF40.10-P-0001-01A
    • Continental Tyre System (CTS), disk wheel designation - GF40.10-P-0001-02A
  • Contents, function description for wheels, tires - GF40.10-P-0999ZZ
  • Survey of winter/summer tires - GF40.10-P-1050
    • Survey of winter tires/disk wheels/recommended tire makes/snow chains - GF40.10-P-1050-01C
    • Survey of winter tires/disk wheels/recommended tire makes/snow chains - GF40.10-P-1050-01CS
    • Survey of summer tires / rims / recommended tire makes - GF40.10-P-1050-02C
    • Survey of summer tires / rims / recommended tire makes - GF40.10-P-1050-02CM
    • Survey of summer tires/disk wheels/ recommended tire makes - GF40.10-P-1050-02CS
• Testing & Repair
  • General information on vehicle level measurement - AR40.00-P-0202A
  • Testing and repair work: Passenger cars: Wheels, chassis alignment check - AR40.00-Z-9140AA
  • Checking condition of rim - AR40.10-P-1010-01A
  • Replace tires - AR40.10-P-1030A
  • Balance wheels - AR40.10-P-1040A
    • Notes
    • Mounting centering sleeve - AR40.10-P-1040-01A
    • Balancing wheels on vehicles with ETS, ASR or ESP - AR40.10-P-1040-03A
    • Adjustment value on the balancing machine for special protection vehicles with CTS wheels - AR40.10-P-1040-04A
  • Perform chassis alignment check - AR40.20-P-0200A
  • General information on chassis alignment - AR40.20-P-0201A
  • Attaching Mercedes-Benz quick-clamping devices - AR40.20-P-0230A
  • Checking vehicle levels at front and rear axles - AR40.20-P-0300B
    • Notes
    • Adjusting vehicle level by altering springs or rubber spring mount - AR40.20-P-0300-01A
  • Checking and adjusting control point of level control - AR40.20-P-0310A
  • Check ball point position - AR40.20-P-0320A
  • Adjusting ball point position - AR40.20-P-0321B
  • Checking and adjusting camber and caster of front wheels - AR40.20-P-0322B
  • Check and adjust front axle toe-in - AR40.20-P-0323B
  • Checking toe-out on turns - AR40.20-P-0325A
  • Checking rear axle camber - AR40.20-P-0331A
  • Check and adjust toe on rear axle - AR40.20-P-0332A
  • Check accidents vehicles and vehicles in which accident damage is suspected - AR40.30-P-0400A
  • Preparations for dimensional and comparative measurement - AR40.30-P-0401A
    • Notes
    • Adjusting fixtures for distance and comparison measurement according to the model concerned - AR40.30-P-0401-01A
  • Performing dimensional and comparative measurement at front and rear axle - AR40.30-P-0402B
    • Notes
    • Carrying out distance and comparison measurements on front axle - AR40.30-P-0402-01C
    • Carrying out distance and comparison measurements on rear axle - AR40.30-P-0402-02B
  • Checking alignment of rear axle carrier (removed) - AR40.30-P-0410B
  • Checking alignment of spring link, camber strut, radius rod, thrust arm and track rod on rear axle - AR40.30-P-0420B
  • Measuring wheel carrier (when removed) - AR40.30-P-0425B
  • Measuring front wheel carrier (when removed) - AR40.30-P-0450A
  • Checking alignment of steering knuckle (removed) - AR40.30-P-0451B
  • Measuring lower wishbone (when removed) - AR40.30-P-0452A
• Maintenance
  • Remove/install wheels, rotate if necessary - AP40.10-P-4050Z
  • Check tires for damage and cracks - AP40.10-P-4051Z
  • Removal/Mounting of the wheels, Rotating if required - wh4050pkw0000x(4050)
  • Checking tire for condition and damage, Measurement of tread depth - wh4051pkw0000x(4051)
  • Correction of the tire pressure - wh4060pkw0000x(4060)
  • Retightening the wheel bolts - wh4070pkw0000x(4070)