Right Cylinder Bank ME-SFI Control Module (N3/12)

Closed Throttle Signal -  Connect DVOM between right cylinder bank ME-SFI control module (N3/12) connector 1 terminals No. 38 and 16 (socket box terminals No. 38 and 16). Turn ignition on. With throttle closed, voltage should be more than 4 volts. With throttle at Wide Open Throttle (WOT), voltage should be 2-3 volts. If voltage is within specification, test is complete. If voltage is not within specification, possible causes are wiring harness failure or right cylinder bank ME-SFI control module (N3/12) defective. Repair as necessary.