Overhaul - 722 Series
- Application
- Identification
- Description
- Lubrication
- On-Vehicle Service
- Adjustments
- Trouble Shooting
- Transmission Slips In All Gears
- Transmission Slips During 3-4 Upshift
- Intermittent No 5TH Gear
- No 5TH Gear Or Transmission Shifts To 5TH Under Load
- No Positive Engagement In Reverse
- Harsh Engagement When Shifting Gears
- Harsh Engagement When Selecting "D" Or "R"
- Harshness On 4-3 Downshift
- Chatter During Upshift
- Will Not Upshift
- Upshifts At Higher Speeds Than Specified
- Upshifts At Lower Speeds Than Specified
- No KICKDOWN
- No 4-3 Or 3-2 Downshift
- Uncontrolled Downshifts Outside Range Of KICKDOWN Switch
- Poor Acceleration From Stopped Position
- Parking Pawl Will Not Engage
- Selector Lever Does Not Engage In "R" Or "P"
- Engine Will Not Start In "P" Or "N" Position
- Smoke In Exhaust (Fluid Loss)
- Fluid Loss Between Torque Converter & Primary Pump
- Howling Noise When Changing Gears (Under Full Load)
- Howling Noise Which Increases As Engine Rpm Increases
- 1ST Gear & Reverse Too Loud
- 3RD Gear Too Loud
- Rattling Noise At 1500 Rpm In All Positions Except "R"
- Light Grinding Noise In "P" & "N" Positions
- "Rolling" Noises When Driving In Reverse
- Testing
- Removal & Installation
- Torque Converter
- Transmission Disassembly
- Component Disassembly & Reassembly
- Transmission Reassembly
- Torque Specifications
- Wiring Diagrams