LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1993 >> 300E Base, 2.8 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Programming >> Electronic Traction System Adaptation

Electronic Traction System Adaptation

NOTE: If the CC/ISC control module (N4/3) is replaced, or if a control module from another vehicle is temporarily installed, the ETS adaptation must be activated. Thereby allowing the CC/ISC control module to adapt to the vehicle configuration.
  1. Turn ignition on.
  2. Wait 3 seconds
  3. Start engine.
  4. Wait 7 seconds.
  5. Turn ignition off
  6. Turn ignition on.
scientia non olet · About LEMON Manuals