LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1986 >> 560SL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Removal & Installation >> Installation

Removal & Installation: Installation

  1. To install, reverse removal procedure. When installing torque converter to transmission, coat converter tangs, turbine and stator shaft with assembly lubricant. Be sure that converter is fully seated in transmission before installing in vehicle.
  2. Tighten transmission-to-engine M10 bolts to 41 ft. lbs. (55 N.m) and M12 bolts to 48 ft. lbs. (65 N.m). Tighten drive shaft clamping nut to 22 ft. lbs. (30 N.m). Tighten flex plate-to-torque converter bolts to 31 ft. lbs. (42 N.m).
scientia non olet · About LEMON Manuals