LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 1985 >> 380SL >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Specifications & Procedures >> Adjustment >> Camber

Specifications & Procedures: Adjustment: Camber

  1. Test under loaded condition. Load vehicle with 2 weights of 143 lbs. (65 kg) on front seat. Load one similar weight on rear seat and fill tank with fuel. If camber is not within specifications, loosen lock nut of eccentric bolt on rear side of lower control arm.
  2. To adjust, rotate eccentric bolt until camber is within specifications. Hold eccentric bolt in place and tighten lock nut.
scientia non olet · About LEMON Manuals