Upper Steering Column Shaft: Installation

Inspect and replace bearings and races, if necessary. Reverse removal procedure and reinstall upper steering shaft. Refer to the TORQUE SPECIFICATIONS  table.

Fig 1: Sectional View of Steering Column & Steering Shaft

1. Replace bearings and races as required and reverse removal procedure. See TORQUE SPECIFICATIONS . Check shaft adjustment.
2. Check that pin inserted through hole in jacket casing is located in bore of steering shaft. Mark on end of shaft should be up when installing.
3. Steering shaft length should be 31.7" (805 mm). Tap gently with soft mallet to adjust length before installation.