Fuel Injection Pump: Removal
- Remove battery and battery frame. Clean pump and fuel lines to prevent entrance of dirt into system. Disconnect all injection, vacuum, fuel and oil lines at injection pump. Plug injection lines and fuel hose unions at pump.
- Remove connecting rods and cable from pump. On Turbo models, unscrew upper part of oil filter. Remove all engine oil lines at the filter body, then remove filter body from crankcase. Ensure no gasket parts fall into crankcase.
- On all models, remove 4 hex head bolts at supporting bracket, adjustment bolt and 3 mounting bolts. Remove injection pump rearward.