Automatic Altitude Compensating Device: Installation
Using shims removed, install compensating device into place. Be sure vent tube is positioned at lowest point to drain off any possible condensation. Hold small nut and tighten large nut.
TIGHTENING SPECIFICATION
| Application | Ft. Lbs. (N.m) |
|---|---|
| Rocker Arm Cover | 4 (5.4) |
| Glow Plugs | 36 (49) |
| Pre-Combustion Chamber | 119 (161) |
| Nozzle-to-Holder | 54 (73) |
| Nozzle Holder-to-Head | 54 (73) |
| Nozzle Holder Connector | 54 (73) |
| Injection Pump Shaft Nut | 51 (69) |
| Connecting Fitting (Union) | 29-36 (39-49) |
| Injection Pipe Cap Nuts | 18 (24) |