All Other Models

If caster is not within specifications, loosen bolts attaching carrier of rear engine mounting and strut for lateral support on front axle carrier to eliminate any distortions of engine rubber mountings. Mark position of leave spring on body and loosen nuts. Using suitable spanner (111 589 02 09) adjust cam bolt equally on both sides. Tighten all nuts and bolts. Recheck caster.

To adjust minor differences between left and right sides, loosen locking nut of cam bolt on upper steering knuckle bearing. Rotate cam bolt using suitable spanner (180 589 00 05). Inspect rubber ring to ensure a proper seal and tighten locking nut on cam bolt.