DTC U2300:55 Instrument Cluster Configuration Not Implemented: Notes
DTC U2300:55 (POWER LIFTGATE CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Instrument cluster configuration not implemented |
| Detection condition |
- The power liftgate (PLG) control module received a signal which indicates the instrument cluster configuration is not performed.
|
| Fail-safe |
- Stops the power liftgate (PLG) system operation.
|
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the power liftgate (PLG) control module to the power liftgate (PLG) control module, 30s or more need to have elapsed since the ignition was switched ON (engine off or on).
- Instrument cluster configuration is not completed.
- Instrument cluster malfunction
- Power liftgate (PLG) control module malfunction
|
| System wiring diagram |
Not applicable |