LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2025 >> CX-5 S Preferred >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Technical Data - Suspension >> Suspension Technical Data

Suspension Technical Data

FRONT WHEEL ALIGNMENT SPECIFICATION (UNLOADED)(1)

Item Fuel gauge indication
Empty 1/4 1/2 3/4 Full
Maximum steering angle [Tolerance ±3°] Inner 37°54'
Outer 30°54'
Total toe-in Tire [Tolerance ±4 {0.2}] (mm {IN}) 2.0 {0.08}
Rim inner [Tolerance ±3 {0.1}] Vehicle equipped with 17 inch wheel: 1.2 {0.047}
Vehicle equipped with 19 inch wheel: 1.3 {0.051}
(degree) 0°10'±0°20'
Caster angle (2) (Reference value) [Tolerance ±1°] VIN M, VIN L
VIN Y		 5°52' 5°54' 5°55' 5°56' 5°57'
Camber angle (2) (Reference value) [Tolerance ±1°] -0°25' -0°25' -0°26' -0°26' -0°26'
Steering axis inclination (Reference value) 11°56' 11°57' 11°57' 11°58' 11°58'
(1) Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.

(2) Difference between left and right must not exceed 1°30'.
REAR WHEEL ALIGNMENT SPECIFICATION (UNLOADED)(1)

Item Fuel gauge indication
Empty 1/4 1/2 3/4 Full
Total toe-in Tire [Tolerance ±4 {0.2}] (mm {IN}) 2.0 {0.08}
Rim inner [Tolerance ±3 {0.1}] Vehicle equipped with 17 inch wheel: 1.2 {0.047}
Vehicle equipped with 19 inch wheel: 1.3 {0.051}
(degree) 0°10'±0°20'
Camber angle (2) (Reference value) [Tolerance ±1°] VIN M, VIN L
VIN Y		 -0°37' -0°39' -0°41' -0°43' -0°44'
Thrust angle (Reference value) [Tolerance ±0°48'] -0°00'
(1) Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.

(2) Difference between left and right must not exceed 1°30'.
FRONT LOWER ARM BALL JOINT STUD STARTING TORQUE SPECIFICATION

Item Specification
Front lower arm ball joint stud starting torque 17 N.m {1.7 kgf.m, 12 ft.lbf} max.
Front lower arm ball joint stud rotational torque 3.2 N.m {33 kgf.cm, 28 in.lbf} max.
Front stabilizer control link ball joint starting torque 0.8-3.5 N.m {8.2-35 kgf.cm, 7.1-30 in.lbf}
Rear stabilizer control link ball joint starting torque 0.8-3.5 N.m {8.2-35 kgf.cm, 7.1-30 in.lbf}
STANDARD TIRE AND WHEEL SPECIFICATION (EXCEPT MEXICO)

Item Specification
Wheel Size 17 x 7J 19 x 7J
Inset (mm {IN}) 45 {1.8}
Pitch circle diameter (mm {IN}) 114.3 {4.50}
Material Aluminum alloy
Tire Size P225/65R17 100H P225/55R19 99V
Air pressure (kPa {PSI}) Front 230 {34} 240 {35}
Rear 230 {34} (4) 240 {35} (4)
Remaining tread (mm {IN}) 1.6 {0.063} min.
Wheel and tire Lug nut tightening torque (N.m {kgf.m, ft.lbf}) 108-147 {12-14, 80-108}
Wheel and tire runout (mm {IN}) Radial direction 1.5 {0.059} max.
Lateral direction 2.0 {0.079} max.
Wheel imbalance (g {OZ}) Adhesive-type (1): 13 {0.46} max. Knock-type (2)(3): 8 {0.3} max. Adhesive-type (1): 12 {0.42} max. Knock-type (2)(3): 7 {0.2} max.
(1) Do not install four or more weights. Do not affix the weights such that they are parallel to each other or overlapping. The total weight of all the weights is 160 g {5.64 oz} or less.

(2) Do not install three or more weights. One weight is 60 g {2.1 oz} or less and two weights are 100 g {3.53 oz} or less.

(3) If a weight of 125 g {4.41 oz} is to be added, divide the weight into two pieces and affix.

(4) When towing a trailer, make sure that the tire pressures of the rear tires are at least 20 kPa (0.2 bar, 2.9 psi) higher than the recommended tire pressures indicated on the tire pressure chart on the driver's door frame.
STANDARD TIRE AND WHEEL SPECIFICATION (MEXICO)

Item Specification
Wheel Size 17 x 7J 19 x 7J
Inset (mm {IN}) 45 {1.8}
Pitch circle diameter (mm {IN}) 114.3 {4.50}
Material Aluminum alloy
Tire Size 225/65R17 102V 225/55R19 99V
Air pressure (kPa {bar <psi>}) Front Up to 3 persons 230 {2.3, <33>} 250 {2.5, <36>}
Full load 260 {2.6, <38>} 260 {2.6, <38>}
Rear Up to 3 persons 230 {2.3, <33>} (4) 250 {2.5, <36>} (4)
Full load 280 {2.8, <41>} (4) 290 {2.9, <42>} (4)
Remaining tread (mm {IN}) 1.6 {0.063} min.
Wheel and tire Lug nut tightening torque (N.m {kgf.m, ft.lbf}) 108-147 {12-14, 80-108}
Wheel and tire runout (mm {IN}) Radial direction 1.5 {0.059} max.
Lateral direction 2.0 {0.079} max.
Wheel imbalance (g {OZ}) Adhesive-type (1): 13 {0.46} max. Knock-type (2)(3): 8 {0.3} max. Adhesive-type (1): 12 {0.42} max. Knock-type (2)(3): 7 {0.2} max.
(1) Do not install four or more weights. Do not affix the weights such that they are parallel to each other or overlapping. The total weight of all the weights is 160 g {5.64 oz} or less.

(2) Do not install three or more weights. One weight is 60 g {2.1 oz} or less and two weights are 100 g {3.53 oz} or less.

(3) If a weight of 125 g {4.41 oz} is to be added, divide the weight into two pieces and affix.

(4) When towing a trailer, make sure that the tire pressures of the rear tires are at least 20 kPa (0.2 bar, 2.9 psi) higher than the recommended tire pressures indicated on the tire pressure chart on the driver's door frame.
TEMPORARY SPARE TIRE AND WHEEL SPECIFICATION (EXCEPT MEXICO)

Item Specification
Wheel Size 16 x 4T 17x 4T
Inset (mm {IN}) 40 {1.6} 35 {1.4}
Pitch circle diameter (mm {IN}) 114.3 {4.50}
Material Steel
Tire Size T145/90D16 106M T155/90D17 101M
Air pressure (kPa {PSI}) 420 {60}
Remaining tread (mm {IN}) 1.6 {0.063} min.
Wheel and tire Lug nut tightening torque (N.m {kgf.m, ft.lbf}) 108-147 {12-14, 80-108}
TEMPORARY SPARE TIRE AND WHEEL SPECIFICATION (MEXICO)

Item Specification
Wheel Size 17 x 5 1/2J
Inset (mm {IN}) 45 {1.8}
Pitch circle diameter (mm {IN}) 114.3 {4.50}
Material Steel
Tire Size 185/80R17 99M
Air pressure (kPa {bar <psi>}) 320 {3.2, <46>}
Remaining tread (mm {IN}) 1.6 {0.063} min.
Wheel and tire Lug nut tightening torque (N.m {kgf.m, ft.lbf}) 108-147 {12-14, 80-108}
scientia non olet · About LEMON Manuals