Charging System Warning Light
- Verify that the battery is fully charged. (See BATTERY INSPECTION .)
- Verify that the assembly condition of the drive belt is normal. (See DRIVE BELT INSPECTION [SKYACTIV-G 2.0]
.)
- Switch the ignition ON (engine off), verify that the charging system warning light illuminates.
- If it does not illuminate, inspect the charging system warning light and the wiring harness.
- Verify that the charging system warning light turns off after the engine is started.
- If the charging system warning light does not turn off, perform the DTC inspection, then perform troubleshooting according to the corresponding diagnostic procedure. (Refer to [DTC INSPECTION
], [DTC TABLE [PCM]
]
.)