Boot Band Assembly Note

Assemble the boot band to the boot.
Crimp the boot band using the SST.

Courtesy of MAZDA MOTORS CORP.
Verify that the crimping clearance A is within the specification.
Specification

2.9-3.7 N.m {30-37 kgf.cm, 26-32 in.lbf}
- If crimping clearance A exceeds the specification, reduce SST clearance, and crimp the boot band again.
- If crimping clearance A is less than the specification, increase SST clearance, and crimp a new boot band.
Rotate the by hand and verify that it is securely installed to the boot band.