LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> MX-5 Miata Club >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Indicator Unit Inspection >> LED Illumination Inspection >> When using M-MDS

When using M-MDS

  1. Connect the M-MDS to the DLC-2.
  2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
    1. Select "DataLogger".
    2. Select "Modules".
    3. Select "IC".
  3. Using the simulation function item LCD_SEG, verify that the warning/indicator lights are displayed as shown in the following figure.
    • If the warning/indicator lights are not displayed as shown in the figure, replace the indicator unit. (See INDICATOR UNIT REMOVAL/INSTALLATION .)
      G14603468Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals