DTC C0063-54: SAS Control Module System
C0063-54: (DSC) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
SAS control module system |
| Detection condition |
NOTE:
- The yaw rate sensor is built into the SAS control module.
- The DSC HU/CM detects that the yaw rate sensor value initialization was not implemented.
|
| Fail-safe |
(See DTC TABLE [DSC] .) |
| Possible cause |
- The initialization procedure for the yaw rate sensor has not been performed (See
DSC RELATED PARTS SENSOR INITIALIZATION PROCEDURE
.)
- DTCs are stored in the SAS control module. (yaw rate sensor malfunction) (See DTC TABLE [SAS]
.)
- DSC HU/CM malfunction (Refer to DSC HU/CM REMOVAL/INSTALLATION
in service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
|
| System wiring diagram |
|