DTC U0452-82: Error Signal Received From SAS Control Module

U0452-82: (VCM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Error signal received from SAS control module
Detection condition	The vehicle control module (VCM) receives an error signal from the SAS control module.
Fail-safe	(See DTC TABLE [VCM] .)
Possible cause	Internal malfunction related DTCs are stored in the following modules. Vehicle control module (VCM) (See DTC TABLE [VCM] .) Body control module (BCM) (See DTC TABLE [BCM] .) SAS control module related DTCs are stored in the body control module (BCM). (See DTC TABLE [BCM] .) SAS control module malfunction (Refer to applicable [INSPECTION] in service information.) Vehicle control module (VCM) malfunction (built-into body control module (BCM)) (Refer to BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION in service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram	Not applicable